Float System Flotation System for Ultralight Aircraft, Paramotor, PPG Smoke

Description

Overview
Float System is an industry first cost-effective alternative float for paramotor, paragliding, SIV and hang gliding pilots who fly over water. Utilizing genuine abrasion resistant Cordura® fabric with a 4 point Velcro® mounting system - it installs in minutes and can add up to 300N of buoyancy in the advent of a water landing. Reusable design allows for easy repacking and recharging after a freshwater or saltwater incident.
How It Works
Designed for a range of possible flight applications across paramotor, paragliding and hang gliding its easily adaptable to a variety of installation scenarios. During a water landing, a “bobbin” dissolves releasing a puncture needle into the
CO
2
cartridge, inflating the bladder and creating buoyancy.
Floatation is created by two individual (1x left, 1x right) units capable of a combined inflation capacity up to 300N of displacement. More than twice the size of an adult life jacket. Alternatively, each individual unit can be manually inflated in two ways. An oral inflation tube on each unit (left and right) and a manual inflation pull-string.
Mounting
Installation scenarios vary by application. The Float System is suitable for use on most paramotor frames and includes 8 attachment points for various configurations. Its design is universal enough to adapt to various diameter frame designs or harness shoulder straps. Left and right units open in their respective direction. Mounting must be clear of obstruction, easily accessible in an emergency and the bladder must be puncture free.
Left and right of your frame
Left and right harness shoulder straps
Recharging
A recharge kit is offered for purchase. Unscrew the bobbin end cap and CO
2
cartridge and dispose of the used CO
2
cartridge, bobbins and release clips. Unscrew the valve nut, compress the bladder and remove all CO
2
inside. Screw in the valve nut. Install the replacement clip, screw in the CO
2
cartridge and insert the replacement bobbins - screw in the bobbin end cap.
Features
Freshwater or Saltwater compatible
4x Velcro® connection points
2x Additional securement straps
Includes
1x Left Float
1x Right Float
2x 33g CO
2
Cartridges
2x Bobbins
2x Clips
Specifications
Float Dimensions:  495mm x 114mm x 50mm
Bladder Dimensions: 482mm x 381mm
Individual Float Weight: 290g
CO
2
Cartridge Weight: 145g
Comparison Table
Product
Weight
CO
2
Size
USD Price
Recharge
PPG Smoke Float System
870g
66g
9.95
.95
Nirvana Agama
650g
45g
0.00
0.00
Aviator / PowerFloat U
211g
70g
0.00
.00
Aviator / PowerFloat Twin
398g
50g
0.00
.00
Aviator / PowerFloat 2Bsure XL
711g
140g
0.00
.00
Legal Disclaimer:
This device is NOT A LIFE JACKET! User ASSUMES ALL RISK of injury or death. No express or implied warranties are made concerning its use or performance. This device is NOT A SAFETY DEVICE nor does it conform to any U.S. Coast Guard, National, International or ISO standards. This device is not for recreational use and should only be worn by users under constant observation. The buoyancy and its distribution in the device are NOT sufficient to float a conscious or unconscious person.
Paragliding
Unlimited
Team
FLY SAFE